jointer planer: May 2011

Tuesday, May 31, 2011

Wixey WR510 Digital Planer Readout with Fractions

Fits most portable planers
Easy to install, calibrate, and use
Displays Inches with fractions or millimeters
Large easy to read display angled for easy viewing

Replace the inaccurate stock height gauge on your portable planer and stop constantly using calipers to check stock thickness! Most digital calipers only read out in decimal measurements, forcing you to do the mental math to convert to fractions. If your stock is measuring .575" and you need 9/16", how much do you need to remove with your next pass through the planer? With the Digital Planer Height Gauge simply lower your planer until the gauge reads .565 - 9/16. It cant get any easier! Uniq

List Price: $ 59.99

Source: http://www.jointer-planer.net/2011/06/wixey-wr510-digital-planer-readout-with-fractions/

DELTA 37-275X X5 Professional 6-Inch 1-Horsepower Jointer, 120/240-Volt 1-Phase

Quality glue-ups time after time. DELTA-inchs 6-inch professional jointer makes it easy with a 1 hp motor, rack and pinion fence system, three-knife cutterhead and easy-to-position infeed table.
Three-knife cutterhead creates 14,400 cuts per minute
Adjustable infeed table features an easy lever operation
Measures 46 by 28.5 by 48.5 inches; weighs 225 pounds
Jointer includes an induction motor, enclosed stand, center-mounted fence, three-knife cutterhead, dust collector, and push blocks

Whether you’re shopping for your very first jointer for your home workshop or your third for your professional shop, we think Delta’s X5 is an excellent choice. Its price tag comes in under many of its competitors, but the quality is still top-notch, and Delta didn’t skimp on the features, our favorite of which is the fence’s ability to tilt both left and right. If you’re cutting just a slight bevel, it doesn’t really matter which way the fence is angled. But for bigger angles, it

Saturday, May 28, 2011

DEWALT DW7351 Folding Table for DW735 Planer

Productivity
Performance
Backed by a 3-year warranty
Lightweight and tough aluminum construction
Easy on/off

Features: Productivity. * Performance. Includes: Two Tables * Hardware KitDesigned to work with the DW735 planer, the DeWalt DW7351 folding tables are detachable and can be folded for convenience. With lightweight and tough aluminum construction, these 13-inch long tables add length to the planer surface. These tables measure 13 inches long and come with an easy-to-install hardware kit.

List Price: $ 75.04

Source: http://www.jointer-planer.net/2011/05/dewalt-dw7351-folding-table-for-dw735-planer/

Porter-Cable 557 7 Amp Plate Joiner Kit

Plate joiner kit handles a variety of wood and offers seven different cutting settings. Seven-position rotating depth stop for FF, #0, #10, #20, Simplex, Duplex, and Max (#6) biscuits
Industry-leading, super powerful 7 Amp motor rotates blade at 10,000 RPM. Fence tilts from 0 degrees to 135 degrees with positive adjustable stop at 90 degrees
Four-inch blade makes standard-size cuts; two-inch blade easily handles cuts as fine as 1-1/2 inches
Measures seven inches in height and weighs 7.5 pounds
Comes with two blades, centering plate, spanner wrench, dust bag, and chip deflector

Offering seven cutting settings to handle a variety of wood types, the Porter-Cable 557 Deluxe Plate Joiner Kit boasts an industry-leading motor for powerful, dependable performance. Whether you're a professional cabinetmaker or woodworker, you'll appreciate the 557's versatile fence and efficient design.557 Deluxe Plate Joiner Kit
At a Glance:Plate Joiner kit offers seven cutting settings to handle a variety of joining applications

Includes 4-inch blade for standard-size cuts and a 2-

List Price: $ 412.90

Source: http://www.jointer-planer.net/2011/05/porter-cable-557-7-amp-plate-joiner-kit/

DEWALT DW680K 7 Amp 3-1/4-Inch Planer

Heavy-duty 7.0 Amp motor provides a smooth, even finish in the hardest of woods
3/32-inch (2.5-milimeter) maximum cut in one pass reduces the amount of passes on your material
Accepts large resharpenable high speed steel blades for straight edging or framing applications
Calibrated Depth Adjustment Knob for accurate depth setting and eliminating the need to re-zero your depth
Also accepts reversible carbide blades for more detailed, accurate woodworking; Precision-machined shoe bottom and side provides flat surface finish as well as accurate and square rabbet joints

If you’re a serious woodworker, than the DEWALT DW680K planer is a necessary addition to your woodworking shop. The rugged 7 amp, 15,000 rpm motor produces steady, level results on even the toughest applications. This planer features increased function and quality with up to 3/32-inches of cut in a single pass and an increased amount of passes allowed with handy kick stand. The DW680K is compatible with reversible carbide blades that are equipped for resharpening and ideal for straight edge

List Price: $ 287.41

Source: http://www.jointer-planer.net/2011/05/dewalt-dw680k-7-amp-3-14-inch-planer/

Popular Mechanics Workshop: Jointer & Planer Fundamentals: The Complete Guide

It happens all the time: woodworkers proudly survey their handiwork only to discover gaps in the glue joints and between parts. The solution? This comprehensive guide. It delves into every aspect of each tool—basic anatomy, features, motor sizes, dust ports, maximum cut, and more. Check out bench-top, stationary, and portable models of each; accessories, such as push sticks and knife-sharpening jigs; and all the must-know techniques, including face and edge jointing and staggered cut planing.

List Price: $ 17.95

Source: http://www.jointer-planer.net/2011/05/popular-mechanics-workshop-jointer-planer-fundamentals-the-complete-guide/

Grizzly G2790 Universal Knife Grinder

120-grit stone raises and lowers
Knife holder angle adjusts from 15 Degrees to 90 Degrees
Max blade length 20"
Overall height is 13"
Overall length is 24"

This dry-type Knife Grinder is ideal for sharpening planer and jointer knives. High quality cast iron construction, together with large capacity (will sharpen up to 20" planer blades) makes this grinder an excellent investment. Heavy-duty motor is 1/2 HP, TEFC capacitor start, 110V, with pre-lubricated ball bearings and runs at 3450 RPM.

List Price: $ 239.95

Source: http://www.jointer-planer.net/2011/05/grizzly-g2790-universal-knife-grinder/

JET 708457K JJ-6CSX 6-Inch 1-HP Jointer, 115/230-Volt 1-Phase

6-inch woodworking jointer; fence tilts 2 ways, features 90 and 45-degree stops
1-horsepower, single-phase, 115/230-volt motor; 46-inch bed
Cast-iron bed
Includes jointer, front and read safety guards, three steel knives, dust chute, stand, jack screw cutter head
7-3/8 by 46 by 31-3/4 table surface; 258-pounds; 1-year warranty

Includes 6-in Closed Stand Jointer - 708457K, Front &amp, Rear Safety Guards, Jack Screw Cutter HeadAre you ready for a jointer that gets the wood flat and straight every time? The JET 708457K JJ-6CSX 6-Inch 1 HP Jointer, 115/230-Volt 1 Phase offers a precision-machined, extra-long cast-iron table to ensure accuracy you can trust. An ideal choice for your shop, this high-performance machine includes an exclusive auto-set quick change knife system to save you time and help increase productivity..

List Price: $ 841.00

Source: http://www.jointer-planer.net/2011/05/jet-708457k-jj-6csx-6-inch-1-hp-jointer-115230-volt-1-phase/

JET Jointer/Planer Combo - 8in., Model# JJP-8BT

Heavy-duty 120V, 13 Amp motor for various cutting applications
Two high speed steel knives for precise smooth cuts
Oversized, ergonomic knobs provide ease of use and maximum control
Large aluminum extruded fence makes jointing stable and precise
Sheet metal outfeed table with height adjustment supports long workpieces and helps reduce snipe

The JET 8in. Jointer/Planer Combo is ideal for smaller shops or limited space on the job; the compact benchtop design fits conveniently in small shop environments. This powerhouse has features usually only found on big floor models. Precision adjustment knobs, compact design, and a powerful 13 Amp motor are only a few features that make this jointer/planer the right choice for wherever you may need it. Cutting Width (in.): 8, Cutting Depth (in.): 1/8, Cuts Per Minute (CPM): 18,000, Rated RPM: 9,

List Price: $ 499.99

Source: http://www.jointer-planer.net/2011/05/jet-jointerplaner-combo-8in-model-jjp-8bt/

Powermatic 54A Deluxe 6-Inch Jointer with Quick-Set Knives

6-inch jointer with a 66- by 7-¼-inch table surface equipped with quick-set knives
Powered by a 1-horsepower 1-ph motor
Quick-set knives offer fast, accurate and easy replacement
Heavy steel stand and cast iron center-mount fence, Assembly required
Fence has positive stops at 90 and 45 degrees

Includes 54A 6-in Deluxe Jointer - 1791279DXK, (3) High-Speed, Heat-Treated Auto-Set Steel Knives, Rout-R-Lift System, Dust Collection Port, Cutterhead Guard, Industrial Push-Button SwitchThe Powermatic 54A Six-Inch Jointer makes it easy to achieve the high levels of accuracy you need when creating flat, straight surfaces for elegant projects. Designed and built to provide precision and dependability, this jointer boasts a cutter-head with "Quick Set" knife system and heavy-duty construction for

List Price: $ 1,378.00

Source: http://www.jointer-planer.net/2011/05/powermatic-54a-deluxe-6-inch-jointer-with-quick-set-knives/

JET 708457DXK JJ-6CSDX 6-Inch 1 HP Jointer with Quick-Set Knive System, 115/230-Volt 1-Phase

Extra-Long cast iron table for better control and more accuracy
1/2-Inch Rabbeting Capacity; 33-1/8-Inch long fence with 45 and 90-Degree stops
Powerful 1-horsepower motor;-industrial push button controls
3 high-speed steel knives-Inch the cutter head; Quick Set Knives provide easy changing
4-Inch dust port for efficient dust and chip disposal

The JET 6in. Long Bed Jointer offers one of the longest working surfaces in its class. Three high speed steel quick-change knives provide rapid cutting and a superior finish without the need for a knife-setting gauge. An exclusive auto-set quick-change knife system lets you replace or change all three blades in a fraction of the time other machines take. A powerful 1 HP motor easily handles the toughest jointing tasks. Cutting Width (in.): 6 1/6, Cutting Depth (in.): 1/2, Cuts Per Minute (CPM):

List Price: $ 979.00

Source: http://www.jointer-planer.net/2011/05/jet-708457dxk-jj-6csdx-6-inch-1-hp-jointer-with-quick-set-knive-system-115230-volt-1-phase/

DEWALT DW7350 Planer Stand with Integrated Mobile Base

Maximum versatility
Durable and stable under heavy loads
Easy movement and storage of planer and stand
Comes in heavy duty size of 30-by-24.2-by-6.9-inches and weighs 57-pounds
Includes mobile base, stand, hardware, MDF top, shelf

Provide dependable support for your planer while keeping it mobile using the DeWalt DW7350 Planer Stand with Integrated Base. This set-up features strong, reliable, heavy-gauge steel brackets that are capable of supporting even the bulkiest bench top planers, and a medium-density fiberboard top that is predrilled for easy installation of any DeWalt planer. If your planer doesn't line up with the existing holes, it's easy to drill new holes to accommodate it. Perhaps the most innovative feature o

List Price: $ 256.22

Source: http://www.jointer-planer.net/2011/05/dewalt-dw7350-planer-stand-with-integrated-mobile-base/

Freud C600 10-Inch Replacement Planer Knives for Ryobi AP10 (2-Pack)

Produces the smoothest cut
Precision-machined for best results; pre-ground to a razor sharp edge
Made from premium high-speed steel stock
2-pack of planer knives
Manufacturer's limited lifetime warranty

Covered by Freud's limited lifetime warranty 10" Replacement Planer Knives for Ryobi AP10 2-Piece Set Precision machined for best results Premium high speed steelThe Freud Difference
Freud manufactures some of the most innovative, technologically advanced saw blades in the world. To ensure that the highest quality products meet the toughest design standards, Freud owns and operates six manufacturing facilities in Western Europe. Freud is one of the few manufacturers of woodworking tools in t

List Price: $ 49.68

Source: http://www.jointer-planer.net/2011/05/freud-c600-10-inch-replacement-planer-knives-for-ryobi-ap10-2-pack/

Jet 708015 JSSG-10 Slow Speed Wet Sharpener

Enclosed motor housing keeps debris and water from the-interior of the tool
Variable Dial Speed Control maintains outer wheel speed regardless of sharpening stone diameter
Torque Adjustment applies consistent pressure to drive shaft
Oversized Water Tray has flared edge and molded top to capture more water during sharpening
Built-in storage tray provides a convenient place for sharpening accessories

This is not just another sharpener; Jet has done its homework on this one and loaded the JSSG-10 with features. The slow speed wet sharpener includes: 1) enclosed motor housing to keep debris and water from the interior of the tool; 2) variable speed control to maintain optimum outer wheel speed; 3) torque adjustment that applies consistent pressure to the drive shaft; 4) oversized water tray with a flared edge and molded top to capture water runoff during sharpening; 5) built-in storage tr

List Price: $ 411.00

Source: http://www.jointer-planer.net/2011/05/jet-708015-jssg-10-slow-speed-wet-sharpener/

TORMEK Planer/Jointer Blade Jig

For HSS blades of any length. Min. width W. Also for mitre guillotine blades.

List Price: $ 172.99

Source: http://www.jointer-planer.net/2011/05/tormek-planerjointer-blade-jig/

Deulen 12" Jointer/Planer Knife Sharpening Jig

Easy-to-use
Superior to professional sharpening service
Saves time and money
How-to video included

The 12" Deulen Sharpener is the answer to putting an edge on your jointer and planer knives. The key is the two brass blade holders inset into the hardwood handle. These tracks hold the blades securely and at the proper angle. With a blade in each track, it is a simply a matter of holding the handle and rubbing the blades against an abrasive surface. We recommend abrasive paper in a progression of grits from 120 to 400 grit for final polishing. It couldnt be easier, and the proof is performance.

List Price: $ 89.99

Source: http://www.jointer-planer.net/2011/05/deulen-12-jointerplaner-knife-sharpening-jig/

Diamond Knife Hone - Planers, Jointer Knives - Hone Tek

Sharpen any planer or jointer knife without having to remove knife from cutter head
Coated with 400 and 600 mesh micro diamonds to sharpen high speed steel and carbide easily
Solid oak handle; 4" length
0

Sharpen any planer or jointer knife without having to remove knife from cutter head

List Price: $ 0.00

Source: http://www.jointer-planer.net/2011/05/diamond-knife-hone-planers-jointer-knives-hone-tek/

Factory-Reconditioned Ryobi ZRAP1301 15 Amp 13-in Surface Planer with RapidSet Blade System

Cutter head speed of 9,000 RPM
Planing height of 6-in
Planing width of 13-in
Planing depth of 1/8-in for board 6-in wide or less
2-1/4-in inner diameter shop vacuum or quick flip-up dumping door

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 15 Amp 13-in Surface Planer with RapidSet Blade System - ZRAP1301, Depth Adjustment Handle With Screw, Switch Key, Hex Key, Magnetic Blade Wrench, Open-End Wrench

List Price: $ 219.99

Source: http://www.jointer-planer.net/2011/05/factory-reconditioned-ryobi-zrap1301-15-amp-13-in-surface-planer-with-rapidset-blade-system/

SHOP FOX W1742 15-Inch Planer with Cast Iron In and Out Feed

Maximum cutting width: 15-Inch
Maximum cutting height: 8-Inch
Cutter head diameter: 3-Inch
Power feed rollers: solid serrated steel
Knives: 3

Equipped with pedestal mounted thermal overload safety switch, cast iron extension wings, an impressive 15" x 8" capacity and a built-in mobile base, you'll find everything you ever wanted in a 15" planer including an affordable price.

List Price: $ 1,699.99

Source: http://www.jointer-planer.net/2011/05/shop-fox-w1742-15-inch-planer-with-cast-iron-in-and-out-feed/

Black & Decker 7698K 5.2 Amp 3-1/4-Inch Planer

5.2 Amp planer offers versatile functionality for a variety of uses
16,500 revolutions per minute; 5/64-inch deep-cutting capacity
5/16-inch rabbeting depth capacity and chamfering groove allow for decorative finish work
Includes 10 positve stops, front depth adjustment handle
2-year warranty

2.8A, 19,000 RPM. Ball and sleeve bearing construction. Cuts 3 1 4" wide, up to 1 4" maximum depth of cut. 5 16" maximum rabbeting capacity. Fine depth adjustment for precise material removal. Chamfering groove for beveling corners. Lock on button for conThe Black & Decker 7698K 5.2 Amp 3-1/4-Inch Planer offers the versatility and power you need for performing a variety of planing functions, from smoothing rough materials to added the finishing, decorative touches to your carpentry work. With it

Source: http://www.jointer-planer.net/2011/05/black-decker-7698k-5-2-amp-3-14-inch-planer/

DEWALT DW735X 13-in Two-Speed Thickness Planer with Support Tables and Extra Knives

Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier
Two-speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
Fan-assisted chip ejection vacuums chips off at the cutter head and exhausts them out of the machine
19-3/4-in cast-aluminum base is 2X more rigid than a standard 10-in base and folding tables

Includes 13-in Two-Speed Thickness Planer - DW735X, Dust Hose Adapter, Dust Ejection Chute, Extra Set of Knives, Infeed Table, Outfeed Table

Source: http://www.jointer-planer.net/2011/05/dewalt-dw735x-13-in-two-speed-thickness-planer-with-support-tables-and-extra-knives/

Rockwell ProGrade 7A Planer 7.0 Amp 3-1/4-Inch

Industrial aluminum base with V-grove
Left or right side dust chip ejection port
Soft grip comfort handle
Lock-on switch for continuous use
Cutting depth adjustment

The Rockwell heavy-duty planer is a woodworker's dream with its proprietary dual exhaust system for either left or right chip ejection. High-precision features include cast aluminum base, front micro-depth adjustment with ergonomic handle and two-finger trigger.

Source: http://www.jointer-planer.net/2011/05/rockwell-prograde-7a-planer-7-0-amp-3-14-inch/

Festool HL 850 E 7 Amp Planer

Single knife cutter-head with spiral design with replaceable cutting knife for a smooth, quiet and ?chatter-free? cut.
Multiple head options to create rustic architectural effects in beams and flooring.
Unlimited rabbeting depth with flush cutter side design and retractable spring-loaded guard.
Rotary handle depth adjustment allows precise depth setting to 1/256" (1/10 mm) up to 9/64" (3.5 mm).
highly efficient dust extractable design accomodates extraction from either side for less mess and clean up.

Includes HL 850 E Planer - 574539, Parallel Guide - 484513, Rabbet Depth Guide - 484512, Systainer 3 Case - 445596The 850-watt Festool HL 850 E Planer is built to deliver clean cuts that are flush to adjacent surfaces. Its convenient thumb-lock depth control, smart MMC electronics, durable "chatter-free" head design, and easy-to-replace blades all work to make your job easier, while near-total chip extraction keeps your workspace clean and protects your work surface.HL 850 E Planer
At a Glanc

Source: http://www.jointer-planer.net/2011/05/festool-hl-850-e-7-amp-planer/

Grizzly G0452 6" Jointer

The latest addition to our family of jointers has some of the most remarkable features found anywhere. Starting from the ground up: built-in "kick-stand" mobile base (just push the lever down, push the machine where you want it & kick the lever back up!), built-in dust chute with 4" dust collection hood, quick adjusting lever on the infeed table, fine control handwheel on the outfeed table, positive stop at 1/8" on the infeed table, large 5" x 35" cast iron fence, rack & pinion fence adjustment,

Source: http://www.jointer-planer.net/2011/05/grizzly-g0452-6-jointer/

Bosch 1594K 6.5 Amp 3-1/4-Inch Planer Kit

3-1/4-inch planer kit with 2-blade system, chip ejection switch, and ratcheting depth knob
6-1/2 amp motor delivers 16,500 rpm; easy-to-adjust bevel fence; spring-loaded park rest stand
Durable micrograin carbide blades
Includes planer, bevel guide fence, blade wrench, chip bag, and case
11-1/8-inch shoe length; 6 pounds; 1-year warranty

This well-designed planer offers fast stock removal and the smoothest finish--exactly what we expected from Bosch. The powerful 6.5 amp motor runs the versatile two-blade Woodrazor system at 16,500 rpm with a protective shield that covers the section of blade that's not in use. The fence itself deserves applause--bevels are accurate and easy to adjust. We love the chip ejection as well. Too many times, we've tried tools with an exhaust system that might as well not be there, but this one actuall

Source: http://www.jointer-planer.net/2011/05/bosch-1594k-6-5-amp-3-14-inch-planer-kit/

Grizzly G0612 6" x 24" Bench Top Jointer

45 deg and 90 deg fence stops
Cast iron table measures 28 1/2" x 6 1/4" with fence measuring 4 3/16" x 22 3/4"
Cutterhead knives: 2 Cutterhead speed: 10,000 RPM
Maximum depth of cut: 1/8" Cuts per minute 20,000
Motor: 2 HP, 110V, single phase

Don't let the size of this bench top jointer fool you! With its cast iron tables and center mounted cast iron fence, this 6" Jointer is tough enough to handle any job. It also features a 2 HP motor, 2-1/2" dust port, large dust collection bag, 45° bevel adjustment and easy to adjust knives. Great for shops with limited space or take it to the job site for portable jointing power!

Source: http://www.jointer-planer.net/2011/05/grizzly-g0612-6-x-24-bench-top-jointer/

Tuesday, May 31, 2011

Monday, May 30, 2011

Saturday, May 28, 2011

Friday, May 27, 2011

Thursday, May 26, 2011

Wednesday, May 25, 2011

Monday, May 23, 2011

Sunday, May 22, 2011

Saturday, May 21, 2011

Friday, May 20, 2011

Thursday, May 19, 2011

Wednesday, May 18, 2011

Tuesday, May 17, 2011

Monday, May 16, 2011

Sunday, May 15, 2011

Saturday, May 14, 2011

Friday, May 13, 2011

Thursday, May 12, 2011

Wednesday, May 11, 2011

Tuesday, May 10, 2011

Monday, May 9, 2011

Sunday, May 8, 2011

Saturday, May 7, 2011

Friday, May 6, 2011

Wednesday, May 4, 2011